How to make a chocolate transfer

blogpic1.jpg

When I discovered cake decorating, one of the first books I fell in love with was The Whimsical Bakehouse – Fun-to-Make Cakes That Taste as Good as They Look  by Liv Hansen and Kaye Hansen. One of the techniques covered in the book is how to make chocolate transfers. These edible decorations can be made weeks in advance. They can be made large for an impressive cake topper or small for a fun cupcake topper. The fluidity of the chocolate lends itself to fine-line designs that can be hard to replicate in other ways.

You should know these basic tips before working with chocolate:

  • Do not get any water in the chocolate because it will make it seize.
  • Because of the water issue, you cannot use gel food colors in chocolate. Instead, you must use candy colors, which are oil-based.
  • Follow the directions to heat your chocolate in the microwave in short intervals. It burns easily.
  • You must print a “mirror image” of your design. This is especially important if there is wording on your design.
  • You may store chocolate transfers for up to a month in a cool place. Use an airtight container.

blogpic2.jpg

This is what I used:

Large flat cookie sheet

Images printed to desired size

Tape

Parchment paper

Candy melts- I use this brand because it is nut-free. Other brands would work as well.

Candy colors

Fine tip squeeze bottle (parchment cones are also recommended and can be found at the same link)

Step 1:

Arrange the images by spacing them out on your cookie sheet. This will allow you to rotate it and work on one at a time without bumping into the others.

blogpic3.jpg

Step 2:

Tape down your images to your cookie sheet and lay the parchment paper over them. You may also tape the edges of your parchment paper to keep it steady at this point.

blogpic4.jpg

Step 3:

Choose a color scheme. I had four squeeze bottles so I decided on black, pink, blue and white.

blogpic5.jpg

Step 4:

Melt your candy melts then add the candy colors. For the black outline color, I needed a lot so I am pouring it in this photo. For the pale blue and pink, I carefully added a small amount with the tip of a toothpick. (Tip: You can make this step faster if you buy pre-colored candy melts.)

blogpic6.jpg

Step 5:

Stir well.

blogpic7.jpg

This silicone bowl is flexible so I used it to pour the chocolate directly into my sqeeze bottles.  (Tip: The less you fill the bottles, the lighter and easier they are to control. I learned this in the process.)

blogpic8.jpg

Step 6:

Pipe your outlines in black or your desired color.

blogpic9.jpg

Step 7:

Add your first accent color. I was using a free-form approach to paint in my accent colors. You can be as structured or as loose as you want with your colors.

blogpic10.jpg

Step 8:

Add any additional accent colors. Remember that you have to work in reverse order from the front of the image to the background because it will be flipped over in the end.

blogpic11.jpg

Step 9:

Add a thick background of white. Be sure that the white chocolate slightly overlaps your original black outline at the edges. This will make the decoration strong when it is flipped over.

blogpic12.jpg

Step 10:

Allow your transfers to cool at room temperature for at least 15 minutes.  Touch the backs gently to ensure they are hard. At this point, you can remove any tape from the edge of your parchment paper. I carefully cut my parchment into four squares so I was able to flip each design over into my hand and peel the parchment from the back slowly.

blogpic13.jpg

This is what it looks like when you flip over your transfer. This is why you printed a “mirror image.”

blogpic14.jpg

Optional: You can add “relief piping” or fondant accents to the finished side of your transfers for added interest. I cut out some tiny flowers from fondant, then gently shaped them on a foam mat by using a ball tool and a stick tool.

blogpic15.jpg

I attached them to my birdhouse with dots of melted chocolate.

blogpic16.jpg

The finished transfers could be added to the top or sides of a cake. They could also be used as cupcake toppers. I hope you enjoyed the tutorial!

blogpic17.jpg

Happy Caking!

Renée

Renée
Reneé caught the cake decorating bug seven years ago when she made her son's first birthday cake. Since then, she's created hundreds of custom cakes and cupcakes. Her work has been featured on various baking and party blogs. In her free time, you'll find her planning the next baking project or sharing her knowledge on CakeJournal.
Renée
Renée
Renée

Latest posts by Renée (see all)

Did you enjoy this article?
Share the love
Join our newsletter
Online Cake Decorating Class
Around the web

Comments

  1. FirstTime says

    I’ve had the Whimsical Bakehouse book for a while and this tutorial helped me get the nerve to finally give this a try! I think I did everything you said but my transfer cracked. I thought maybe I had a temperature problem with the chocolate so I tried again. Better, but the colors I used didn’t seem level. The middle seemed raised. I was attempting a cartoon dog to use on a cake with several colors. Any thoughts on the cracking?

  2. miriam says

    Did you allow your layers to harden one at a time? I’m just wondering if there is any bleeding with the colors if you do it all at once. I have done this method with buttercream frosting but never with chocolate.

    • Renee says

      Hi Miriam, I start with the outline color. Then I melt and use all of the additional colors one at a time in sequence. The chocolate dries so quickly that each color is dry by the time I’m adding the next one. If one of your colors was still soft when you added the next, i don’t think they would bleed. But you might bump into the soft color and disturb the line of the design possibly. I hope that answered your question. Good luck :)

  3. says

    I have heard of buttercream transfers but that always looked too messy. I loveeeeee this idea of chocolate transfer. Can you imagine the possibilities? My god…my mind is racing with ideas..,hehehe

  4. Donndarae says

    Thank you Renee, this is great. It is very easy to follow and straight forward. Keep sharing your awesome ideas. Can’t wait to see what is next.

  5. Helen says

    I love this, thank u so much for sharing. You have made it look fairly straight forward, I will definitely try. Do u just photocopy an image?

    • Renee Daly says

      Helen, if you have access to a computer, you can Google coloring page images. That way, you find images with nice strong outlines. Remember to print the ‘mirror image’, especially if there are words invoved.If you don’t have acces to a computer or printer, you could photocopy an image, lay parchment paper over it and trace it with a fine marker. You could then flip the parchment and pipe directly on the back side of it. When you reveal your transfer, it will be true to the original image.

Leave a Reply

Your email address will not be published. Required fields are marked *


− two = 0

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>